All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ carbide reamer cutting tools ] match 33 products.
0.787" 20mm Hss Titanium Roughing End Mills Set HRC55 RLD Tools
Product Name: | HRC55 Roughing End Mill 20mm |
---|---|
Coating: | AlTiSiN/Others |
Raw Material: | WF25 |
8mm 1/4" 5/16 Roughing End Mills For Steel HRC55
Product Name: | HRC55 Roughing End Mill 8mm |
---|---|
Coating: | AlTiSiN |
Raw Material: | WF25 |
High Efficiency 3 Flutes Aluminium End Mill DLC Coating Big Capacity 12mm
Product Name: | 3 Flute 12mm Aluminum End Mill U Shape With DLC Coating |
---|---|
Flute Diameter: | 12mm |
Flute Length: | 36mm |
2 Or 4 Flute End Mill For Aluminum 3/8" 1/8" Carbide Flat End Mill Cutter 4mm
Product: | HRC50 2 Flute 4mm Carbide Flat Endmill |
---|---|
Raw Material: | ZY10EF Zhangyuan |
Flute Number: | 2 |
1mm 1/25" 1/8" 1/16" 2 Flute End Mill Stainless Steel Tungsten Carbide Milling Bits For Jewelry
Product: | HRC60 2 Flute Solid Carbide End Mill 1mm |
---|---|
Raw Material: | GU25UF |
Diameter: | 1mm |
Carbide 2 Flutes Ball Nose End Mill HRC65 4mm 1/8 Inch For Hard Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Brand: | RLD |
Diameter: | R2 |
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.25 |
Flute Length: | 5mm |
High Efficiency U Shape 3 Flutes Aluminium End Mill DLC Coating Big Capacity
Product Name: | High Efficiency U Shape 3 Flutes Aluminium End Mill DLC Coating Big Capacity |
---|---|
Flute Diameter: | Customized |
Flute Length: | Customized |
DLC Coating 3 Flutes Aluminium Square End Mill U Groove Shaped
Product Name: | 3 Flute 10mm Aluminum End Mill U Shape With DLC Coating |
---|---|
Flute Diameter: | 10mm |
Flute Length: | 30mm |
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.0 |
Flute Length: | 4mm |